Night Stars Landscaping Lighting Premium Series Giveaway

Presents The 

Night Stars  Landscaping Lighting Premium 
Series Giveaway
(Red, Green, and Blue with Remote)

(arv $249.99)
1- Winner
Holiday Contest and Sweeps is honored to work with one of my amazing sponsors,
Viatek Consumer Products to bring you a giveaway that will have everyone on your
block amazed at the beauty of your house outside all year long with the “Night Stars
Landscaping Lighting Premium Series with Multi-Colors and Remote Giveaway”. This
prize is perfect for holidays such as Christmas, Fourth of July, Valentines and many more
or just by a color of your choice any time of the year.


The Night Stars Landscape Lights are decorative lights that are ideal for both indoor and outdoor use. It projects points of brightly colored lights onto walls, dance floors, landscapes, pools, gazebos, etc. Create an instant atmosphere for parties and entertaining or add a splash of color and interest to your home, yard, or garden. It projects red, green, or a combo of the two colors as well as an optional flash/pulse setting. The included Radio Frequency remote lets you control your Laser Light from anywhere in and around the house (not just close by to the light). The built-in timer runs for 2, 4, 6, or 8 hours and is also programmed from the remote. So set back and let your house or yard be the talk of the town. Here are a few of the
color scemes that this unique product will project.
 Syncing Your Remote:
DO NOT PLUG IN LASER UNIT UNTIL PROMPTED IN THE STEPS BELOW. If you already have, unplug it and then follow the steps below, in order.
 First, install the included 23A battery in the remote. To test the remote’s battery connection, press any button and the LED will illuminate for 1 second. If the LED does not illuminate, check to make sure you have installed battery according to the correct polarity.
 Syncing the remote: With your remote ready (battery installed) and making sure you are within range of the laser, plug in the laser power supply adapter to a power source. Within 5 seconds of plugging the laser in, press the ON/OFF button on your remote to sync it with the laser. Occasionally, re-syncing the remote with the laser may be necessary. To re-sync, remove the battery from the remote. Unplug the laser unit from the power source for 1 minute then repeat “Syncing the Remote” steps above. Simple and easy to use.
Viatek Consumer Products


This Giveaway is in no way endorsed, associated or affiliated with Facebook,
Twitter or any other Social Networking Site. This giveaway is valid in the
Continental United States Only and will end on 7/30/15.
a Rafflecopter giveaway

Holiday Contest and Sweeps received a copy for review purposes in this
giveaway. Viatek Consumer Products will be responsible for the awarding &
shipping the prize directly to the winner. The winners will have 48 hours
to reply to the prize notification email, failure to do so in that time frame
will result in a disqualification and another winner shall be drawn.

One Comment

Leave a Reply

Your email address will not be published. Required fields are marked *